General Notes

1. Sizes: Motor Width: 7″, Battery: 12″ x 1″ x 1″, Drum Width: 4 ¼″.
2. For even cords distance application:
   • The minimum distance between each cord is 8 ½″.
   • The battery (width with bracket) is 1 5/8″. In order to hide the battery behind the track, you will need a minimum space of 1 5/8″.
3. The motor can be installed in the middle without considering wire length ONLY if the track is shorter than 36″.
   • If the track is longer than 36″ and the motor is installed in the middle, the battery wire will not be long enough to reach the side. In this case, the motor will be installed on either the left or right side (not in the middle).
4. The minimum track length for 3 & 4 cords is 27 ½″.
   • Maximum Drapery Weight: 12 kg. Suggested weight: 10kg.

How to Reset Upper Limit

1. Both the lower limit (LL) and upper limit (UL) is pre-set in the remote factory settings.
2. The customer needs to reset upper limit, do not touch lower limit unless needed.
3. How to reset upper limit (UL):
   1. Press ^ and – (dash) button together (hold for a few seconds), until the motor jogs (quick up and down motion). This means you’ve entered the setting mode.
   2. For micro adjustments of the motor (either UL or LL), press the ^ button or v button briefly (for a split second) in the direction you want until the position you desire.
   3. Hold both ^ and – (dash) button together until the motor jogs again. The new limit is set.
4. Changing Motor Speed
   • Minimum: 28 RPM, 13 seconds (60″/min)
   • Medium: 34 RPM, 11 seconds (73″/min)
   • Maximum: 40 RPM, 9 seconds (85″/min)

   Note: The factory default speed is set at 34 RPM (medium).

   1. Acceleration: Press P2 (at the back of the remote), press ^ and – (dash) together again, the running speed is accelerated. The sound will also be slightly different (the pitch will be higher) and the motor will jog up and down quickly.
   2. Deceleration: Press P2 (at the back of the remote), press v then v again, the motor running speed is decelerated. The sound will also sound slightly different (the pitch will be lower), and the motor will jog up and down slowly.